Most products gets a small revision update every few month which are based on production batches. Here some version release notes:
TBS DISCOVERY PRO TOP PCB:
Version 1.0
- Internal release
Version 1.1 (batch1)
- Initial release
Version 1.2 (batch2&3)
- Added test points for production test
- Additional connection between OSD MCU and simpleBGC MCU for future use
Version 1.3 (batch4)
- Added Battery Voltage pad on VTX side for our lovely IMRC 600mW users to power VTX directly from battery cause they have internal DCDC!
- Better USB connector fixation on pcb done with vias
Version 1.4 (batch5)
- Added Molex pinout names
- Optimized 5 capacitor values
TBS DISCOVERY PRO BOTTOM PCB:
Version 1.0 (batch1)
- Initial release
Version 1.1 (batch2,3,4,...)
- Added test points for production test
TBS DISCOVERY IMU PCB:
Version 1.0 (batch1)
- Initial release
Version 1.1 (batch2,3,4,...)
- Added blue LED to indicate IMU is properly powered
TBS DISCOVERY GOPRO PCB:
Version 1.0 (batch1,2,3,4,...)
- Initial release