TBS Discovery Pro

Reset your gimbal into factory default settings.
If your gimbal is playing up or not behaving correctly, a factory reset may be required.  Software issues Checklist: Re-install t...
Tue, 27 May, 2014 at 6:50 AM
TBS Discovery Pro Manual
Below is a link to the TBS Discovery Pro manual. PDF Manual for download: http://www.team-blacksheep.com/tbs-discovery-pro-manual.pdf
Tue, 27 May, 2014 at 6:50 AM
Camera switcher is not working
By default as a safety precaution, the switching function is disabled. You will need to enable it, to activate the video switching function got to t...
Tue, 27 May, 2014 at 6:51 AM
There is a newer simpleBGC firmware online. Should I perform an update?
New firmwares comes usually as public beta first. They are not officially supported by us. Once there is a stable release we prepare new setting files and s...
Tue, 27 May, 2014 at 6:51 AM
Gimbal is not well leveled or drifts in flight
If the horizon is not 100% leveled but remains stationary as you operate the tilt control you need to re-calibrate it: - Power up your Disco PRO - Con...
Tue, 27 May, 2014 at 6:52 AM
The TBS CORE or the Gimbal is shutting down after a few minutes!
POTENTIAL PROBLEM: Overpowered video transmitter The TBS CORE that is pre-installed on the TBS DISCOVERY PRO is limited in the amount of power it can sup...
Tue, 27 May, 2014 at 6:54 AM
Version Information
Most products gets a small revision update every few month which are based on production batches. Here some version release notes: TBS DISCOVERY PRO...
Tue, 27 May, 2014 at 6:55 AM
Gimbal shaking and jamming.
Any Gimbal problem should first mitigate MECHANICAL problems before looking into the SOFTWARE. Mechanical Issues Checklist: Verify motors are co...
Tue, 27 May, 2014 at 6:55 AM
I upgraded my Gimbal Firmware, Gimbal doesn't work.
You should not upgrade your firmware as upgrading you firm ware overwrites the TBS settings. Please see, Reset your gimbal into factory default sett...
Tue, 27 May, 2014 at 6:55 AM
Setting Gimbal controls to the Futaba Radio controller.
You can just connect channel 5 and channel 6 from the FUTABA receiver to CH5 and CH6 on the top plate. These are not controlled via PPM. You can use PPM for...
Tue, 27 May, 2014 at 6:56 AM