TBS Discovery Pro
If your gimbal is playing up or not behaving correctly, a factory reset may be required.
Software issues Checklist:
Re-install t...
Tue, 27 May, 2014 at 6:50 AM
Below is a link to the TBS Discovery Pro manual.
PDF Manual for download:
http://www.team-blacksheep.com/tbs-discovery-pro-manual.pdf
Tue, 27 May, 2014 at 6:50 AM
By default as a safety precaution, the switching function is disabled.
You will need to enable it, to activate the video switching function got to t...
Tue, 27 May, 2014 at 6:51 AM
New firmwares comes usually as public beta first. They are not officially supported by us. Once there is a stable release we prepare new setting files and s...
Tue, 27 May, 2014 at 6:51 AM
If the horizon is not 100% leveled but remains stationary as you operate the tilt control you need to re-calibrate it:
- Power up your Disco PRO
- Con...
Tue, 27 May, 2014 at 6:52 AM
POTENTIAL PROBLEM: Overpowered video transmitter The TBS CORE that is pre-installed on the TBS DISCOVERY PRO is limited in the amount of power it can sup...
Tue, 27 May, 2014 at 6:54 AM
Most products gets a small revision update every few month which are based on production batches. Here some version release notes:
TBS DISCOVERY PRO...
Tue, 27 May, 2014 at 6:55 AM
Any Gimbal problem should first mitigate MECHANICAL problems before looking into the SOFTWARE.
Mechanical Issues Checklist:
Verify motors are co...
Tue, 27 May, 2014 at 6:55 AM
You should not upgrade your firmware as upgrading you firm ware overwrites the TBS settings.
Please see, Reset your gimbal into factory default sett...
Tue, 27 May, 2014 at 6:55 AM
You can just connect channel 5 and channel 6 from the FUTABA receiver to CH5 and CH6 on the top plate. These are not controlled via PPM. You can use PPM for...
Tue, 27 May, 2014 at 6:56 AM